Chevrolet 2002 Express Owner'S Manual Download

Page: 163 / 411

3-24

Compact Disc Messages

If the disc comes out, it could be for one of the
following reasons:
D If you’re driving on a very rough road. When the

road becomes smooth the disc should play.

D If it’s very hot. When the temperature returns to

normal, the disc should play.

D The disc is upside down.
D It is dirty, scratched or wet.
D The air is very humid. (If so, wait about an hour and

try again.)

D If the CD is not playing correctly, for any of the

above reasons, try a known good CD.

If any error occurs repeatedly or if an error can’t be
corrected, contact your dealer.

AM-FM Stereo with Cassette Tape and
Compact Disc Player with Radio Data
System (RDS) and Automatic Tone Control
(If Equipped)

Standard Radio

Bose

not shown

Playing the Radio

PWR (Power): Press this knob to turn the system on
and off.

VOL (Volume): Turn this knob clockwise to increase
volume. Turn it counterclockwise to decrease volume.

Summary of Contents for 2002 Express



























































































































































































































































































































































































































Search results

Summary of Contents for 2002 Express

Reviews:

Related manuals for 2002 Express

Brands by name

Popular brands

Chevrolet 2002 Express, Owner'S Manual

Search results

Summary of Contents for 2002 Express

Reviews:

Related manuals for 2002 Express

Brands by name

Popular brands