manualshive.com logo in svg

Chevrolet 2000 C-Series, Owner'S Manual

The Chevrolet 2000 C-Series Owner's Manual is a comprehensive guide that provides essential information on operating and maintaining your vehicle. Easily downloadable and completely free, this manual can be found exclusively on manualshive.com, ensuring you have all the necessary instructions at your fingertips.

Share
Download
background image

6-23

NOTICE:

If you use an improper coolant mixture, your
engine could overheat and be badly damaged.
The repair cost wouldn’t be covered by your
warranty. Too much water in the mixture can
freeze and crack the engine, radiator, heater core
and other parts.

If you have to add coolant more than four times a year,
have your dealer check your cooling system.

NOTICE:

If you use the proper coolant, you don’t have to
add extra inhibitors or additives which claim to
improve the system. These can be harmful.

Checking Coolant

Coolant Recovery Tank 

(Gasoline Engines 

--

 Specialty Hood)

Summary of Contents for 2000 C-Series




























































































































































































































































































































Reviews:

No comments

Related manuals for 2000 C-Series

Kalmar DCE80-100E Technical Handbook preview
DCE80-100E
Brand: Kalmar Pages: 317
Still RX70-16 Original Instructions Manual preview
RX70-16
Brand: Still Pages: 380
Still RCD25 Original Instructions Manual preview
RCD25
Brand: Still Pages: 176
Labrie EXPERT Maintenance Manual preview
EXPERT
Brand: Labrie Pages: 425
Jungheinrich EFX 410 Operating Instructions Manual preview
EFX 410
Brand: Jungheinrich Pages: 404
Komatsu 960E-1 - Brochure preview
960E-1 -
Brand: Komatsu Pages: 16
Sterling Trucks 360 2006 Manual preview
360 2006
Brand: Sterling Trucks Pages: 213

Brands by name

Popular brands

Load more brands