manualshive.com logo in svg

Chevrolet 2000 C-Series, Owner'S Manual

The Chevrolet 2000 C-Series Owner's Manual is a comprehensive guide that provides essential information on operating and maintaining your vehicle. Easily downloadable and completely free, this manual can be found exclusively on manualshive.com, ensuring you have all the necessary instructions at your fingertips.

Share
Download
background image

4-10

Steering

Power Steering

If you lose power steering assist because the engine
stops or the system is not functioning, you can steer 
but it will take much more effort.

On vehicles with hydraulic brakes, the power steering
and main hydraulic brake system both use the power
steering pump. See “Hydraulic Brake Systems” in 
the Index.

Steering Tips

Driving on Curves

It’s important to take curves at a reasonable speed.

A lot of the “driver lost control” accidents mentioned 
on the news happen on curves. Here’s why:

Experienced driver or beginner, each of us is subject to
the same laws of physics when driving on curves. The
traction of the tires against the road surface makes it
possible for the vehicle to change its path when you turn
the front wheels. If there’s no traction, inertia will keep
the vehicle going in the same direction. If you’ve ever
tried to steer a vehicle on wet ice, you’ll understand this.

The traction you can get in a curve depends on the
condition of your tires and the road surface, the angle at
which the curve is banked, and your speed. While you’re
in a curve, speed is the one factor you can control.

What should you do if this ever happens? Ease up on 
the accelerator pedal, steer the vehicle the way you want
it to go, and slow down.

Speed limit signs near curves warn that you should
adjust your speed. Of course, the posted speeds are
based on good weather and road conditions. Under 
less favorable conditions you’ll want to go slower.

If you need to reduce your speed as you approach a
curve, do it before you enter the curve, while your front
wheels are straight ahead.

This is especially important with a tractor

-

trailer. Try to

adjust your speed so you can “drive” through the curve.
Maintain a reasonable, steady speed. Wait to accelerate
until you are out of the curve, and then accelerate gently
into the straightaway.

Summary of Contents for 2000 C-Series




























































































































































































































































































































Reviews:

No comments

Related manuals for 2000 C-Series

Ravas 5200 User Manual preview
5200
Brand: Ravas Pages: 36
Taylor-Dunn TT-316 36AC Operator'S Manual preview
TT-316 36AC
Brand: Taylor-Dunn Pages: 52
Haldex ITCM 1M Installation & Service Manual preview
ITCM 1M
Brand: Haldex Pages: 28
Volvo A60H Manual preview
A60H
Brand: Volvo Pages: 36

Brands by name

Popular brands

Load more brands