manualshive.com logo in svg

Chevrolet 2000 C-Series, Owner'S Manual

The Chevrolet 2000 C-Series Owner's Manual is a comprehensive guide that provides essential information on operating and maintaining your vehicle. Easily downloadable and completely free, this manual can be found exclusively on manualshive.com, ensuring you have all the necessary instructions at your fingertips.

Share
Download
background image

6-6

NOTICE:

If there is water in your diesel fuel and the
weather is warm or humid, fungus and bacteria
can grow in the fuel. They can damage your fuel
system. You’ll need a diesel fuel biocide to
sterilize your fuel system. Your dealer can advise
you if you ever need this.

If your fuel tank needs to be purged to remove
water, see your dealer or a qualified technician.
Improper purging can damage your fuel system.

Diesel engine vehicles that stand unused for several days
or weeks can develop water in the fuel from
condensation. It helps to fill the fuel tank if the diesel
engine vehicle will not be used for a time.

Fuels in Foreign Countries 
(Gasoline Engines)

If you plan on driving in another country outside the
United States or Canada, the proper fuel may be hard to
find. Never use leaded gasoline or any other fuel not
recommended in the previous text on fuel. Costly repairs
caused by use of improper fuel wouldn’t be covered by
your warranty.

To check on fuel availability, ask an auto club, or
contact a major oil company that does business in the
country where you’ll be driving.

You can also write us at the following address for
advice. Just tell us where you’re going and give your
Vehicle Identification Number (VIN).

General Motors Overseas Distribution Corporation
1908 Colonel Sam Drive
Oshawa, Ontario L1H 8P7

Summary of Contents for 2000 C-Series




























































































































































































































































































































Reviews:

No comments

Related manuals for 2000 C-Series

HELI 14-850 Operation And Maintenance Manual preview
14-850
Brand: HELI Pages: 20
U-Line H-6237 Quick Start Manual preview
H-6237
Brand: U-Line Pages: 3
Kässbohrer Reefer 2023 Series User Manual preview
Reefer 2023 Series
Brand: Kässbohrer Pages: 72
Snorkel EPV16 Operation Manual preview
EPV16
Brand: Snorkel Pages: 96
Paccar Peterbilt 587 Owner'S Manual preview
Peterbilt 587
Brand: Paccar Pages: 239
Eagle Group A218901 Assembly Instructions preview
A218901
Brand: Eagle Group Pages: 2

Brands by name

Popular brands

Load more brands