manualshive.com logo in svg

Chevrolet 2000 C-Series, Owner'S Manual

The Chevrolet 2000 C-Series Owner's Manual is a comprehensive guide that provides essential information on operating and maintaining your vehicle. Easily downloadable and completely free, this manual can be found exclusively on manualshive.com, ensuring you have all the necessary instructions at your fingertips.

Share
Download
background image

3-9

Setting the Tone

BAS: Slide this lever left or right to decrease or increase
the bass.

TRE: Slide this lever left or right to decrease or
increase the treble. If a station is weak or noisy, 
you may want to decrease the treble.

LOUD: To increase bass and treble at low volumes,
press this button. LOUD will appear in the display. 
Press this button again to turn LOUD off.

Adjusting the Speakers

BAL: Slide this lever to the left or right to adjust the
speaker balance between the left and right speakers. 
The middle position balances the sound between 
the speakers.

FAD: Slide this lever to the left or right to adjust the
speaker balance between the front and rear speakers.
The middle position balances the sound between 
the speakers.

Remote Cassette Tape Player (If Equipped)

Your tape player is built to work best with tapes that 
are up to 30 to 45 minutes long on each side. Tapes
longer than that are so thin they may not work well in
this player.

To load a cassette tape, hold the cassette with the tape 
to the right. Then, insert the cassette tape. Tape direction
is displayed by the lighted arrow. To change the tape
direction, press the FF button. The tape will rapidly
advance to the end. Then the tape direction will change.

Once the tape is playing, use the control knobs for
VOLUME, BAL, FAD, BAS and TRE just as you do 
for the radio.

Summary of Contents for 2000 C-Series




























































































































































































































































































































Reviews:

No comments

Related manuals for 2000 C-Series

Parkside PUTK 50 B1 Operating Instructions Manual preview
PUTK 50 B1
Brand: Parkside Pages: 43
Jerr-Dan MPL Operation And Maintenance Manual preview
MPL
Brand: Jerr-Dan Pages: 78
Noblelift HPT20S User Manual preview
HPT20S
Brand: Noblelift Pages: 19
Vestil EPT-2745-45 Service Maintenance Manual preview
EPT-2745-45
Brand: Vestil Pages: 21
Roughneck 25329 Owner'S Manual preview
25329
Brand: Roughneck Pages: 7

Brands by name

Popular brands

Load more brands