manualshive.com logo in svg

Chevrolet 2000 C-Series, Owner'S Manual

The Chevrolet 2000 C-Series Owner's Manual is a comprehensive guide that provides essential information on operating and maintaining your vehicle. Easily downloadable and completely free, this manual can be found exclusively on manualshive.com, ensuring you have all the necessary instructions at your fingertips.

Share
Download
background image

2-66

Service Trans Filter Indicator Light 
(If Equipped)

If your vehicle has this
light, you’ll find it located
below the the instrument
panel cluster.

It monitors the transmission fluid filter. If it ever goes
on, it means your transmission filter is dirty and 
requires replacement.

Malfunction Indicator Lamp 
(Check Engine Light)

If your vehicle is equipped with either a gasoline engine
or an electronically controlled diesel engine, you will
have this light.

If this light comes on or
flashes while you are
driving, two things 
may happen.

First, you won’t notice any difference in engine
performance, but your tail pipe emissions may increase.
Second, your engine may not run properly or may stall
without warning. If either of these things happen, drive
or tow your vehicle to your dealer for service.

This light should come on when the ignition is on, but
the engine is not running, as a check to show you it is
working. If it does not come on at all, have it repaired.

NOTICE:

If you keep driving your vehicle with this light
on, after a while, your emission controls may not
work as well, your fuel economy may not be as
good and your engine may not run as smoothly.
This could lead to costly repairs that may not be
covered by your warranty.

Summary of Contents for 2000 C-Series




























































































































































































































































































































Reviews:

No comments

Related manuals for 2000 C-Series

Airaid 400-602 Installation Instructions preview
400-602
Brand: Airaid Pages: 2
Aero Conestoga Operation Manual preview
Conestoga
Brand: Aero Pages: 18

Brands by name

Popular brands

Load more brands