manualshive.com logo in svg

Chevrolet 2000 C-Series, Owner'S Manual

The Chevrolet 2000 C-Series Owner's Manual is a comprehensive guide that provides essential information on operating and maintaining your vehicle. Easily downloadable and completely free, this manual can be found exclusively on manualshive.com, ensuring you have all the necessary instructions at your fingertips.

Share
Download
background image

5-11

Try to have a GM dealer or a professional towing
service tow your vehicle. They can provide the right
equipment and know

-

how to tow it without damage.

Before you do anything, turn on the hazard warning
flashers (if they have not been damaged).

When you call, tell the towing service:
D The make, model and year of your vehicle.
D Whether you can still move the shift lever.
D If there was an accident, what was damaged.
When the towing service arrives, let the tow operator
know that this manual contains detailed towing
instructions. The operator may want to see them.

If your vehicle uses dragfoilers, be sure to have the
dragfoiler

-

to

-

cab mounting bracket bolts tightened 

after your vehicle has been towed.

Here are specific towing instructions:

Towing Your Vehicle From the Front 
(Front Wheels Off the Ground)

Before Towing

Block the rear wheels of the disabled vehicle. On vehicles
with air brakes, release the emergency brake system by
compressing the brake chamber springs as outlined in 
this section. (Note: This is to prevent the possibility of
the emergency brake being applied during towing.)

On vehicles with hydraulic brakes without an
electric/hydraulic parking brake, release the parking 
brake fully by moving the lever to the 
fully

-

released position.

On vehicles equipped with an electric/hydraulic parking
brake option, remove the propshaft.

Summary of Contents for 2000 C-Series




























































































































































































































































































































Reviews:

No comments

Related manuals for 2000 C-Series

U-Line H-1361 Quick Start Manual preview
H-1361
Brand: U-Line Pages: 6
Komatsu HM350-2R Brochure preview
HM350-2R
Brand: Komatsu Pages: 6
Komatsu HM300-1 Brochure preview
HM300-1
Brand: Komatsu Pages: 6
Pottinger LADEPROFI 4 Profimatic Operating Instructions Manual preview
LADEPROFI 4 Profimatic
Brand: Pottinger Pages: 56
Bishamon BM40M Operation And Service Manual preview
BM40M
Brand: Bishamon Pages: 8
unicraft PHW 1000 K Operating Instructions Manual preview
PHW 1000 K
Brand: unicraft Pages: 32
Buyers Products Company TGC25006V Installation Instructions preview
TGC25006V
Brand: Buyers Products Company Pages: 2

Brands by name

Popular brands

Load more brands