General Check
Equipment
Check
OK
Protective covers
Mounted, firmly bolted and not damaged
Labels, markings
Installed and legible
Functional Test
Equipment
Check
OK
Emergency Stop
When the Emergency Stop button is activated, the
machine should switch off automatically. A restart will not
be possible until the Emergency Stop button has been
unlocked and the On switch has been activated.
1.7 Individual protection gear
For certain work individual protection gear is required.
Protect your face and eyes. During all work and specifically work during which your face and
eyes are exposed to hazards, a safety helmet with facial protection should be worn.
Use protective gloves when handling pieces with sharp edges.
Wear safety shoes when you position, dismantle or transport heavy components.
Use ear protection if the noise level (inmission) in the workplace exceeds 80 dB (A).
Before starting work, make sure that the prescribed individual protection gear is available at the
workplace.
Caution!
Dirty or contaminated individual protection gear can cause disease. Clean it after each use and
once a week.
1.8 For your own safety during operation
Warning!
Before activating the machine, double check that it will not endanger other people or cause
damage to equipment.
Avoid unsafe working practices:
•
The instructions in this manual must be observed during assembly, handling, maintenance
and repair.
•
Use protective goggles
•
Turn off the machine before measuring the workpiece.
•
Do not work on the machine if your concentration is reduced, for example, because you
are taking medication.
•
Stay on the machine until all rotating parts have come to a halt.
•
Use the prescribed protection gear. Make sure to wear a well-fitting work suit and a hairnet,
if necessary.
•
Do not use protective gloves during drilling or milling work.
•
Unplug the shockproof plug from the mains before changing the tool.
6
