7. Appendix
7.1 Copyright
This document is copyright. All derived rights are also reversed, especially those of translation,
re-impression, use of figures, broadcast, reproduction by photo-mechanical or similar means,
and recording in data processing systems, whether partial or total.
The company reverse the right to make technical alterations without prior notice.
7.2 Terminology/Glossary
Term
Explanation
Cross table
Bearing surface, clamping surface for the workpiece with X and Y axis travel.
Taper mandrel
Taper of the tool seat, taper of the bit or the drill chuck.
Workpiece
Piece to be milled, drilled or machined.
Draw-in rod
Threaded bar for fastening the taper mandrel in the spindle sleeve.
Drill chuck
Device for the holding bit.
Collet chuck
Holding fixture for end mill cutters.
Drill-mill head
Upper part of the drilling-milling machine.
Spindle sleeve
Hollow shaft in which the milling spindle turns.
Milling sleeve
Shaft activated by the motor.
Drilling table
Bearing surface, clamping surface.
Taper Mandrel
Cone of the bit or mill chuck.
Spindle sleeve lever
Manual control for activating the bit.
Quick action drill chuck
Manually tighten able bit holding fixture.
Workpiece
Piece to be turned or machined.
Tool
Milling cutter, drill bit, countersink etc…
25
