Chemtrac HydroAct HA4, User Manual

Page: 52 / 97

52 Chapter 3. Sensors
TOC Enabled Options are “Yes” or “No”.
Correlation Parameter
Select which parameter to utilize for the linear relationship. Options are
measured UVA or UVA compensated for sample turbidity.
Slope Enter the calibration slope calculated from the linear correlation.
Offset Enter the calibration offset calculated from the linear correlation.
3.1.4.10 Maintenance Setup
Options
→
Maintenance
→
Setup
Calibration Warning Options are “Enabled” or “Disabled”.
Frequency Default is 3 months.
Last Calibration
Date of the last calibration. Given in DD/MM/YY
3.1.4.11 Calibration
The calibration procedure is described in section 3.1.3.1.
3.1.4.12 Secondary Data
Options
→
Diagnostics
→
Secondary Data