Chemtrac HydroAct 4, User Manual

Page: 57 / 77

4.1 Analog Outputs 57
4.1.4.1 Setup
The setup of the analog output is split into three sections. Later sections can be accessed separately
from the menu or by selecting “Next” from any of the previous pages. To access the analog output
setup:
Options → Setup → Output Setup
Name Device name to identify the control in menus. Text can be up to 25 characters long.
Display Options are to “Show” or “Hide” the device tile on the menu screen.
Enabled Options are “Yes” or “No”.
Mode Options Options are “Manual” which allows the user to manually set an output value; “Data
Output” which maps the output to an analog data source such as a parameter; and “Control
Output” which maps the output to an analyzer generated control signal.
The “Next” button is a shortcut to the following configuration screen.
4.1.4.2 Options for Manual Mode
4.1.4.2.1 Map Output
This configuration screen is accessed by pressing “Next” from the Output Setup configuration screen
or navigating via the Options Menu.
Options
→
Setup
→
Map Output
4.1.4.2.2 Configuration
This configuration screen is accessed by pressing “Next” from the Map Output above screen or
navigating via the Options Menu.
Options
→
Setup
→
Configuration