ChemoMetec NucleoCounter NC-202, Document Compilation

Page: 119 / 127

Doc.No: 991-2021 v. 1.0 · Issue date: 01-Jul-2019
Page 5 of 9
Chemometec A/S · Gydevang 43 · 3450 Allerod · Denmark · support@chemometec.com · www.chemometec.com ·
File types and data storage locations
Data storage location
The ' NC-View™ Data Folder' refers to the location were .cm files are stored. The default folder is the Public
folder on the local drive, allowing all users to access the same data.
Table 2. Default save location for NC-View™ files
File Types
A detailed description of each file type is listed below.
Image files (*.cm)
Image files produced by NC-View™ hold all primary analysis data (sample ID, Fluorescent Images, Counting
data matrix, acquisition setting, instrument ID, user ID and other meta data). These files use a
ChemoMetec® proprietary file format with the .cm-extension and are named based on date and data
recording sequence.
It is not possible to overwrite image files within the NC-View™ system. Image files are stored in the 'NC-
View™ Data Folder', in a directory named: (yyyymmdd), according to the date settings on the PC or tablet
controlling the NC-202™.
The sample ID can be changed by right clicking a data point and selecting ‘Change Sample ID’. The sample
ID change will be registered in the Audit Trail log. The original ID will be stored in the .cm file.
Different sample ID editing rights exists between users (see table 1).
NC-View™ functionalities
Audit Trail
User activity within NC-View™ is recorded in the Audit Trail. The event logs can be inspected in NC-View™
under View>Event Log.
NC-View™
file type
Save location
Image files
(.cm)
C:\Users\Public\Documents\ChemoMetec\NC-View\results
Audit Trail file
(.log)
C:\Users\Public\Documents\ChemoMetec\NC-View\results
Page 119 of 127