Chefman RJ25-C, Manual

Page: 9 / 28

9 10
Note: Do NOT clean the Food Mover™ when hot. Allow the unit to cool completely before washing or
moving any parts of the Food Mover™.
• Gently wipe the exterior of the Food Mover™ with a clean, damp cloth and dry thoroughly.
• Hand wash the Cooking Pan, Grill Rack, and removable Crumb Tray. The accessories are top-rack
dishwasher safe. Fully dry before storing. Do NOT use abrasive cleaning tools or cleansers.
• To remove the Conveyor Belt for cleaning:
• Carefully wipe down the entrance and exit ramps within the unit with a damp towel to remove any
crumbs that may be left in the unit.
CLEANING AND MAINTENANCE
1
2
STEP 1:
Open the Exit Door (1).
STEP 2:
Reach hand under the open Exit Door,
press up on plastic lever inside lower
handle (2) until lower section of Exit Door
disengages from unit; gently pull the door
down to be level with the countertop.
STEP 3:
Using the handle for assistance, gently pull the Conveyor Belt
straight out. The Conveyor Belt is top-rack dishwasher safe; let
dry completely before reinserting. Note: Ensure the Exit Door is
back in place before use.
TROUBLESHOOTING
The conveyor belt isn’t moving.
Check that both doors are open and that the function you have chosen activates the conveyor belt. It’s also
possible the belt is misaligned. Remove the conveyor belt as directed on the FEATURES page and reinsert
it, being sure it’s pushed all the way back into place. If the conveyor still does not work properly, contact
Customer Support.
The Conveyor Belt is moving slowly then jumping.
Check that the conveyor belt is correctly laid on the moving gears.
I'd like to change the temperature to Celsius.
Simply press and hold the silver knob to change from F to C.
The control panel is not responding.
Wait a few seconds before trying the buttons again. If the unit is still not responding, try stopping the function
and starting again or unplugging the unit.
My food has reached my desired doneness but is not out of the unit yet.
To remove any food left in the unit, open the exit door and press the EJECT button. The conveyor belt will
move the food out of the left side of the Food Mover™ onto the exit door. To stop EJECT, either shut the door
or press the EJECT button again. Do NOT insert metal utensils into the Food Mover™.
There is smoke coming from the Food Mover™.
Broiling meat may cause excess splatter to occur and small traces of smoke or flame to occur within the
cooking chamber. This is normal and will quickly dissipate. If the problem continues, unplug unit immediately.
The Overheat warning is illuminated on control panel.
If the unit gets too hot, the word Overheat will
illuminate on the control panel in red. If this occurs, immediately unplug the unit and let it cool before cooking
with it again.