Chef CKG5010W, Instruction Book

Page: 27 / 40

27
If after a few attempts the burner does
not ignite, check that the burner ring and
its cap are correctly positioned.
Turning off the burners
Turn the control knob clockwise to mark «
».
Do not put anything on the hob
that is liable to melt.
Selecting the Correct burner
Above every knob there is a symbol for
the corresponding burner.
For good cooking results, always choose
pans, which correctly fit to the diameter
of the burner used.
Choose thick, flat bottom pots.
Do not place anything, eg. flame
tamer, asbestos mat, between pan
and pan support as serious damage to
the appliance may result.
Do not remove the pan support
and enclose the burner with a wok
stand as this will concentrate and
deflect heat onto the hotplate.
Do not use large pots or heavy
weights which can bend the pan
support or deflect flame onto the
hotplate.
Locate pan centrally over the
burner so that it is stable and does
not overhang the appliance.