V1.1, June 08, 2021
Companion Plus User Manual
© Copyright 2021 Cheelcare
TM
. All rights reserved.
P a g e
|
7
2. Insert the folded Docking Module between the mounted clamps. Keep approximately
12mm/0.5in space between the crossbraces of the chair and the edge of the Docking
Module.
3. Take the screws (3/8-16x1-1/8) and locknuts (3/8-16) from the bag attached to the
Docking Module. Insert the screws from inside the Docking Module into the mounting
holes of the clamps. Place a locknut onto the screw from the opposite side. Tighten the
locknuts onto the screws to secure the connection of the Docking Module to the clamps.
4. Tighten the screws of the clamps with the Allen key to secure them to the frame of the
wheelchair.
Cross braces
Docking Module
12mm/0.5in
Screws
Locknuts
Mounting holes