Check Point Smart-1 205, Getting Started Manual

Page: 31 / 114

Smart-1 205/210 Appliances Getting Started Guide | 31
CHAPTE R 5
Configuring SmartReporter
In This Section:
Preparing SmartReporter in the Security Management Server Environment . 31
Preparing SmartReporter in the Multi-Domain Server Environment .............. 32
Creating a Consolidation Session for SmartReporter ....................................... 33
This section explains how to get up and running with SmartReporter.
Use SmartReporter to generate reports about network events for the Firewall and VPN
Software Blades. To generate reports for other Software Blades (for example, IPS,
Application Control, URL Filtering), use SmartEvent ("
Configuring SmartEvent " on
page 27 ).
Preparing SmartReporter in the Security
Management Server Environment
To configure SmartReporter, first establish connectivity between the components.
1.
Launch SmartDashboard to the Security Management Server.
2. In SmartDashboard, create a new host for each computer that contains a
component of SmartReporter:
a) Select Manage > Network Object > New > Check Point > Host .
b) In the
General Properties
window, click
Communication
and enter the
activation key.
Note
- If the Security Management Server and SmartReporter are installed on
different sides of the firewall, add a rule that allows SIC traffic between them.