Check Point Smart-1 205, Getting Started Manual

Page: 43 / 114

Smart-1 205/210 Appliances Getting Started Guide | 43
CHAPTE R 7
Hardware Diagnostic Tool and
Restoring Factory Defaults
In This Section:
Running the Diagnostic Tool ............................................................................... 43
Restoring Using the WebUI ................................................................................. 45
Restoring Using the Console Boot Menu ........................................................... 46
Restoring Using the LCD Panel .......................................................................... 47
Appliance Hardware Diagnostic Tool
Use the Appliance Hardware Diagnostic Tool (Diagnostic Tool) to make sure that the
appliance hardware is working properly and complies with the appliance
specifications.
Restoring Factory Defaults
If necessary, restore the appliance to its factory default settings or select a new
image.
Important - If you restore factory defaults or select a new image, all
information on the appliance is deleted.
Running the Diagnostic Tool
You can run the Diagnostic Tool from LCD panel, or connect to the Console port with a
Terminal emulation program. For more about the Diagnostic Tool, see sk97251
http://supportcontent.checkpoint.com/solutions?id=sk97251 .
To Run the Diagnostic Tool from the Console boot menu
1. Connect the supplied DB9 serial cable to the console port on the front of the
appliance.