Check Point Smart-1 205, Getting Started Manual

Page: 25 / 114

Configuring Smart-1 Appliances
Smart-1 205/210 Appliances Getting Started Guide | 25
Advanced Configuration
Advanced configuration on Gaia
Advanced configuration on Gaia can be done from the WebUI or the CLI.
Advanced configuration on SecurePlatform
Advanced configuration on SecurePlatform can be done with the sysconfig menu
from the CLI.
Note
- The
sysconfig
menu is only available after running the
First Time
Configuration Wizard in the WebUI.
Connecting to the Smart-1 Appliances CLI
To connect to the command line interface of the Smart-1 Appliances, use one of these:
• The included serial console cable (DB9 DTE to RJ45), with terminal emulation
software, such as PuTTY (from Windows) or Minicom (from Unix/Linux).
Connection parameters for Smart-1 Appliances are: 9600bps, 8 bits, no parity, 1
stop bit (8N1), Flow Control -
None
.
• An SSH connection to the management interface (if SSHD is configured).