Check Point Smart-1 205, Getting Started Manual

Page: 32 / 114

Configuring SmartReporter
32 | Smart-1 205/210 Appliances Getting Started Guide
c) The version is not entered automatically if the SmartReporter version is newer
than the version of the Security Management Server. If so, select the most
recent version available from the Version drop-down list.
d) In the
Management Software Blades
list, select SmartReporter.
3. Install the database on all log servers from which SmartReporter reads data:
select
Policy > Install Database and select the log servers as the targets.
Preparing SmartReporter in the Multi-Domain
Server Environment
To connect SmartReporter to one Domain, define the SmartReporter object in the
SmartDashboard of the Domain ("
Preparing SmartReporter in the Security
Management Server Environment " on page 31 ).
This procedure shows how to connect SmartReporter to all Domains.
To connect SmartReporter to all Domains:
The first stage configuring SmartReporter is to establish connectivity between the
components.
1.
Launch Global SmartDashboard to the Multi-Domain Server.
2. In Global SmartDashboard, create a new host for each computer that contains a
component of SmartReporter:
a) Select
Manage > Network Object > New > Check Point > Host
.
b) In the
General Properties
window, click
Communication
and enter the
activation key.
Note
- If the Multi-Domain Server and SmartReporter are installed on different
sides of the firewall, add a rule that allows SIC traffic between them.
c) The version is not entered automatically if the SmartReporter version is newer
than the version of the Multi-Domain Server. If so, select the most recent
version available from the Version drop-down list.
d) In the Management Software Blades list, select the SmartReporter blade.
3. Select Close and OK .
4. From the
File
menu, select
Save
.