UN41-0563BN
B
A
D
C
English language
Use and maintenance
34
MAINTENANCE INFORMATION
7
Safety advice for maintenance
Maintenance work must be carried out with the work
vehicle on flat, compact ground, with the tractor en-
gine off, parking brake engaged, and ignition key re-
moved, and adopting all the necessary safety meas-
ures required to work safely.
Any maintenance operations that can be carried out
on the business premises come under the ordinary
maintenance envisaged in the instruction manual.
Special maintenance operations require a special-
ised workshop on the premises which meets the
requirements specified by the relative laws in force
(appropriate equipment suitably trained staff etc.);
if you do not have a compliant workshop, contact an
authorised one.
Maintenance interval schedule
To guarantee constant, efficient and safe machine operation, ensure all the maintenance envisaged by the manufac-
turer is carried out.
Maintenance intervals
Interval
Component
Type of work
Manual reference
Every work hour
Dispenser
Cleaning
Ploughshare
Cleaning
Cleaning the ploughshare
Every work day
Lift frame
Inspection
Safety devices
Inspection
Guards
Warning and hazard plates
Inspection
Information and safety signs
Every 50 hours of work
Machine components
Greasing
Lubrication diagram
Nuts and bolts
Tightening
Every 150 hours of work Tyres
Pressure check
Tyre check
Cleaning the ploughshare
Clean the ploughshare to remove any debris, mud, peat,
plant residues etc that may have built up during use.
Lack of cleaning will limit the ejector range, therefore, as
well as affecting the machine’s operation, it also causes
serious mechanical damage.
Proceed as outlined below.
1) Lift the work vehicle off the ground.
2) Loosen the wing nut (
A
).
3) Turn the lock lever (
B
).
4) Push the ploughshare forwards and turn it so it is fac-
ing downwards.
5) Clean the ploughshare with the tool provided (
C
).
6) Once the cleaning is complete, replace the plough-
share in the working position.
7) Check that the Plant Control device (
D
) is inside the
share.
8) Make sure that the share is secured in place with the
lock lever (
B
).
9) Tighten the wing nut (
A
).
