UN41-0542BN
D
C
B
A
A
L
M
E
H
G
F
English language
Use and maintenance
7
TECHNICAL INFORMATION
2
A) Hazard plate:
read the use and maintenance manual
before using the work vehicle.
B) Hazard plate:
do not remain on the seat with the
work vehicle lifted off the ground.
C) Hazard plate:
switch off the tractor; remove the igni-
tion key and store in a safe place before carrying out
any type of work on the work vehicle.
D) Information plate:
strap up at the anchor points
shown to lift the work vehicle.
E) Hazard plate:
this highlights a risk of hands being
cut and sheared between the dispenser and inner
components.
F) Information plate:
lubricate the chain inside the
casing to which the plate is affixed.
G) Plant spacing plate (standard):
this shows the pin-
ions to
fit according to the plant spacing (14 - 50) re-
quired.
H) Plant spacing plate (option):
this shows the pin-
ions to fit according to the plant spacing (31 - 82) re-
quired.
L) Information plate:
this shows the greasing points.
M) Information plate:
this indicates rotation of the part
to which the plate is applied, showing the direction
required to achieve the desired effect.
Information and safety sign
WARNING
Check that all the plates are legible; if they are not,
clean them or - if they are damaged - replace them,
applying the new ones in the same place as the old
ones.
The illustration shows the locations and meanings of the
safety signs.
