16
ENG
GIGIO - SILVESTRO - SERBIS
(Rev. 01/07/2012)
7) connect the smokestack to the
rear smoke outlet which is
integrated on the insert sliding
system. Check the smokestack
being proper and the connection
well sealed.
8) place the insert on the sliding
guides.
9) fasten the 4 nuts (2 left and 2
right) that hold the insert on the
sliding guides. Slide the insert.
WARNING: sliding guides must be properly fastened and / or mounting nut of the sliding guides must
be right tightened. If not, when sliding the insert out it may fall down or hurt a person. Please do
carefully follow the instructions.
GIGIO-SILVESTRO:
EVENTUAL
REGULATION
OF
THE
HANDLE
UNCOUPLING
-
UNDERCARRIAGE
If, after the installation, the handle uncoupling-undercarriage of the file would not have been shut perfectly, you have
the possibility to carry out a manual regulation being acted on the regulation bolts (to see figure here over).
