Instructions for installation and use. Reproduction prohibited. 07/ 2010 version 2.0 TAM
18
3.5.3.2.18
Rescrew the bottom plate on the insert
.
3.5.3.2.19
Screw the sensor on the upper bottom plate
.
3.5.3.2.20
Reposition the upper bottom plate in its place.
3.5.3.2.21
Rescrew the upper bottom plates.
3.5.3.2.22
Repeat all the steps in reverse order to reassemble the insert: position
the heat-resistant components on the bottom, base and side supports, and, finally,
tighten the screws on the side supports.
