Instructions for installation and use. Reproduction prohibited. 07/ 2010 version 2.0 TAM
15
3.5.3.2.3
Connect the collars (2 for the E900 and E1000, and 4 for the
E1200) to the mouths with at least 1 metre of aluminium tubing (not
supplied)
.
3.5.3.2.4
To install the ventilator in its place in the base of the insert,
work inside the combustion chamber as follows: start by unscrewing the
screws on the side
uprights keeping the heat-resistant components in
place.
3.5.3.2.5
Push the vermiculite side panel outwards so as to be able to
remove it.
3.5.3.2.6
After doing the same on the other side, remove the heat-resistant
components from the base.
3
.5.3.2.7
Remove the heat-resistant bottom plates.
3.5.3.2.8
Unscrew the screws attaching the steel plates to the base of the insert
and remove them.
