59
When the instrument is switched On during initialisation of the program, the instrument may
send false data to the serial output, symbolised by the code "error 4" (ER4).
ERASING THE PROGRAM MEMORY
To initialise the programme memory,
press simultaneously when switching On
with the rotary switch and continue to press
until it disappears.
The
PRGM
symbol appears, the message is continuously displayed on the digital
display, for 3 seconds, then it flashes once and a beep indicates that the memory has been
erased.
Note :
Before the beep you can release the button at any time. In this case, it will not be
erased.
ERASING THE MEASUREMENT MEMORY
To initialise the measurement memory,
press simultaneously on when switching
On with the rotary switch and do not release
until it is erased. The MEM symbol lights up,
the message is continuously displayed (top right) for 3 seconds and the number of
addresses available appears on the digital display.
After 3 seconds flashes once and a beep indicates that the memory has been
erased. The number of addresses available then changes to 1920 which is the maximum
capacity of the memory.
Note :
Before the beep you can release the button at any time. In this case, it will not be
erased.
ACCESS TO SEVERAL SPECIAL FUNCTIONS
As applicable, it may be useful to cancel the Auto Off
(1)
and beep functions
(2)
. To do this, press
(1)
, when switching On with the rotary switch, then press
(2)
before releasing
the first button. This method allows you to access several special functions normally
accessible only when switching the instrument On.
PRGM
MEM
MEM
MIN MAX
PRGM
HOLD
