Chauvet MotionOrb, User Manual

Page: 7 / 96

1. Before You Begin
MotionOrb™ User Manual Rev. 1 Page 7 of 96
Product at a
Glance
Use on Dimmer
x
Auto Program
P
Outdoor Use
x
Auto-Ranging Power Supply
P
Sound-Activated
P
Replaceable Fuse
P
DMX
P
User-Serviceable
x
Master/Slave
P
Safety Notes
These notes include important information about the mounting, use, and maintenance of this
product. Read these notes before using the product.
•
Always connect the product to a grounded circuit.
•
Make sure the power cord is not crimped or damaged.
•
Always disconnect the product from the power source before cleaning it or replacing the
fuse.
•
Never disconnect the product from the power source by pulling or tugging on the cord.
•
Always secure the product with a safety cable when mounting it overhead.
•
Keep the product away from flammable materials.
•
The product is not intended for permanent installation.
•
Use the product indoors only.
•
Do not expose the product to rain or moisture.
•
Make sure that the power source voltage is within the range stated on the label or on the
rear panel of the product.
•
Never connect the product to a dimmer or a rheostat.
•
Always replace the fuse with another fuse of the same type and rating.
•
Always install the product in a location with adequate ventilation, and leave at least
20 in (50 cm) between the product and adjacent surfaces.
•
Do not block the ventilations lots on the product’s housing.
•
Do not operate the product in an ambient temperature higher than 104 °F (40 °C).
•
Do not carry the MotionOrb™ by the orb strings.
•
In the event of a serious operating problem, stop using the product immediately.
•
Never try to repair the product. Repairs carried out by untrained people can lead to damage
or malfunction.
•
If repairs are required, contact the nearest authorized technical assistance center.
•
Keep this User Manual for future reference. If the product is sold, be sure to give this
manual to the next owner.