3. Setup
MotionOrb™ User Manual Rev. 1
Page 15 of 96
Mounting
Rig the product from a structure or surface that can support its weight. See
Technical Specifications
in this manual for the product’s weight.
Always use a mounting clamp and safety cable when mounting the product overhead. The
CHAUVET® CLP-15 clamp fits into the two M12 mounting holes and the CHAUVET® CLP-10
clamp fits into the three M10 mounting holes. The CHAUVET® CH-05 safety cable fits through
the safety loop.
For the CHAUVET® line of mounting clamps, go to
www.chauvetlighting.com/cables-clamps-
main.html/
.
Make sure that the structure onto which the product is mounted can support the product’s
weight. For weight information, see
Technical Specifications
.
Orientation
Hang the MotionOrb™ by attaching the top bar a to pipe or truss with mounting clamps so the
orbs strings hang straight down or are be draped up with the bottom loops tied off to another
structure.
Place the MotionOrb™ so that the top bar is accessible for programming and control panel
operation.
Standard
Hanging
Mounting Clamps
Safety Cable
Safety Loop
Summary of Contents for MotionOrb
