background image

 
 
 
 

Page 4 of 16 

Hurricane Haze 1D User Manual Rev. 1 

Product at a 

Glance 

Use on Dimmer 

x

 

Auto Programs 

x

 

 

Outdoor Use 

x

 

Auto-ranging Power Supply 

x

 

 

Sound-Activated 

x

 

Replaceable Fuse 

P

 

 

DMX 

P

 

User-Serviceable 

x

 

 

Master/Slave 

x

 

Duty Cycle 

x

 

 

Safety Notes  

 

 

Please read the following Safety Notes carefully before working with the 
product. The Notes include important safety information about installation, 
usage, and maintenance. 

 

 

  Always connect the product to a grounded circuit to avoid the risk of electrocution. 

  Always disconnect this product from the power source before cleaning it or 

replacing the fuse. 

  Make sure the power cord is not crimped or damaged. 

  Never disconnect the power cord by pulling or tugging on the cord. 

  Do not touch the output nozzle on this product. It is very hot during operation and 

it may remain hot for several hours after turning the unit off. 

  If mounting this product overhead, always secure it to a fastening device using a 

safety cable. 

  Do not mount this product on a flammable surface (e.g., wood, linoleum, carton, 

plastic, or carpet).  

  Always make sure that the voltage of the outlet to which you are connecting the 

product is within the range stated on the decal or rear panel of the product. 

  Keep this User Manual for future consultation. If you sell this product to another 

user, be sure that they also receive this document. 

  This product is for indoor use only! To prevent risk of fire or shock, do not expose 

this product to rain or moisture. 

  Make sure there are no flammable materials close to the unit while operating. 

  Always install this product in a location with adequate ventilation, at least  

20 in (50 cm) from adjacent surfaces.  

  Be sure that no ventilation slots on the unit’s housing are blocked. 

  Make sure to replace the fuse with another of the same type and rating. 

  The maximum ambient temperature (Ta) is 104 °F (40 °C). Do not operate this 

product at higher temperatures.  

  In the event of a serious operating problem, stop using the unit immediately.  

  Never try to repair this product. Repairs carried out by unskilled people can lead 

to damage or malfunction. Please contact the nearest authorized technical 
assistance center. 

  Never connect this product to a dimmer pack. 

  Make sure there are no flammable materials close to the unit while operating. 

  Depending on the amount of fog/haze generated, all fog machines may set off 

smoke detectors. 

  Do not use for space heating purposes. 

  Use only CHAUVET water-based haze fluid. 

  Drain the tank before transporting the product. 

  To eliminate unnecessary wear and improve its lifespan, during periods of non-

use completely disconnect the product from power via breaker or by unplugging it. 

 

FCQ (Fog Cleaner Quart) was specifically developed by Chauvet to clean your 
Hurricane Haze 1D. Make sure you use FCQ regularly, no longer than 90 days 
between cleanings, to increase the life of your product. 

Summary of Contents for Hurricane Haze 1D

















Reviews: