Page 12 of 16
Hurricane Haze 1D User Manual Rev. 1
5.
Technical Information
Hazer Maintenance
Do not allow the hazer to become clogged. After every 40 hours of continuous
operation, use CHAUVET Fog Cleaner Quart (FCQ) through the system to prevent
the accumulation of particulate matter in the heating element.
The recommended cleaning procedure is as follows.
1. Unplug the product from power.
2. Empty all fog fluid from the machine.
3. Add cleaning solution to the tank.
4. Connect the product to power and allow it to warm up.
5. Run the unit in a well-ventilated area until the tank is almost empty.
Do not
allow the pump to run dry.
6. Refill with hazer fluid to continue using the hazer. Run the machine briefly to
clear any remaining cleaning solution from the pump and heater.
Do not operate the machine without fluid at any time.
Fog Cleaner Quart (FCQ) was specifically developed by Chauvet to clean your
Hurricane Haze 1D. Make sure you use FCQ regularly, no longer than 90 days
between cleanings, to increase the life of your product.
Storage
Before storing the hazer, run FCQ through the system as described in the cleaning
procedure above; however, only follow steps 1 through 5
. Do not refill the tank with
fog fluid if storing the hazer.
Cleaning the system prior to storage will help prevent
any particles from condensing inside the pump or heater while not in use.
Test-run your Hurricane Haze 1D on a monthly basis to achieve the best
performance.
Summary of Contents for Hurricane Haze 1D
Page 1: ...User Manual ...
