manualshive.com logo in svg

Chauvet Professional VIP DRIVE 10-5 Nova, User Manual, Page: 40 / 57

Share
Download
Chauvet Professional VIP DRIVE 10-5 Nova User Manual Download Page 40

Page 36 of 53

 Operation

VIP Drive 10-5 Nova User Manual Rev. 1

Test Pattern Spacing

Each test pattern except for the single-color Pure Color patterns will repeat itself to fill the connected video 

product assembly. The Spacing setting determines the size of each repetition or the space between grid 

lines. To set the spacing of all Test Pattern output:

1. Access the 

Display Control

 menu.

2. Turn the 

<MENU>

 knob until 

Test Pattern 

is selected.

3. Press the 

<MENU>

 knob.

4. Turn the 

<MENU>

 knob until 

Spacing 

is selected.

5. Press the 

<MENU>

 knob.

6. Turn the 

<MENU>

 knob to set the spacing, from 

1–8

.

7. Press the 

<MENU>

 knob.

Test Pattern Speed

To set the speed of the Test Pattern Grid lines:

1. Access the 

Display Control

 menu.

2. Turn the 

<MENU>

 knob until 

Test Pattern 

is selected.

3. Press the 

<MENU>

 knob.

4. Turn the 

<MENU>

 knob until 

Speed 

is selected.

5. Press the 

<MENU>

 knob.

6. Turn the 

<MENU>

 knob to set the speed, from 

1–4

.

7. Press the 

<MENU>

 knob.

Main Layer Transition

When switching between input sources in the Main Layer, there are 2 options for the transition effect.

•

Fade

: the video fades from one input source to the other.

•

Cut

: no transition effect, the video switches immediately to the new input source.

To select the transition effect:

1. Access the 

Display Control

 menu.

2. Turn the 

<MENU>

 knob until 

Test Pattern 

is selected.

3. Press the 

<MENU>

 knob.

4. Turn the 

<MENU>

 knob until 

Main Layer Trans 

is selected.

5. Press the 

<MENU>

 knob.

6. Turn the 

<MENU>

 knob to select the transition effect, from 

Fade

 or 

Cut

.

7. Press the 

<MENU>

 knob.

Transition Duration

To set the amount of time it takes to switch between input sources:

1. Access the 

Display Control

 menu.

2. Turn the 

<MENU>

 knob until 

Test Pattern 

is selected.

3. Press the 

<MENU>

 knob.

4. Turn the 

<MENU>

 knob until 

Trans Duration (s) 

is selected.

5. Press the 

<MENU>

 knob.

6. Turn the 

<MENU>

 knob to set the transition duration, from 

0.5–2.0

 (seconds).

7. Press the 

<MENU>

 knob.

Fade To Black Duration

To set the speed of the Fade To Black effect:

1. Access the 

Display Control

 menu.

2. Turn the 

<MENU>

 knob until 

Test Pattern 

is selected.

3. Press the 

<MENU>

 knob.

4. Turn the 

<MENU>

 knob until 

FTB Duration (s) 

is selected.

5. Press the 

<MENU>

 knob.

6. Turn the 

<MENU>

 knob to set the transition duration, from 

0.0–2.0

 (seconds).

7. Press the 

<MENU>

 knob.

Summary of Contents for VIP DRIVE 10-5 Nova


























































Reviews:

No comments