manualshive.com logo in svg

Chauvet Professional VIP DRIVE 10-5 Nova, User Manual, Page: 39 / 57

Share
Download
Chauvet Professional VIP DRIVE 10-5 Nova User Manual Download Page 39

Page 35 of 53

VIP Drive 10-5 Nova User Manual Rev. 1

Operation

Display Control

The Display Control settings control the output on the connected video product assembly, including the 

output status, test patterns, color balance, and input transitions. To access the Display Control menu:

1. Press the 

<MENU>

 knob to access the menu.

2. Turn the 

<MENU>

 knob until 

Display Control 

is selected.

3. Press the 

<MENU>

 knob.

Output Status

To toggle between video output, freezing on 1 image, and fading to black:

1. Access the 

Display Control

 menu.

2. Turn the 

<MENU>

 knob to select the display mode from 

Normal

, 

Freeze

, or 

FTB

 (Fade To Black).

3. Press the 

<MENU>

 knob.

Test Pattern

The VIP Drive 10-5 Nova can use solid colors, gradients, and moving grid line test patterns to test the 

functionality of all connected video products.

To select a test pattern to display:

1. Access the 

Display Control

 menu.

2. Turn the 

<MENU>

 knob until 

Test Pattern 

is selected.

3. Press the 

<MENU>

 knob.

4. Turn the 

<MENU>

 knob to select the type of test patten, from 

Pure Color

, 

Gradient

, or 

Grid

.

5. Press the 

<MENU>

 knob.

6. Turn the 

<MENU>

 knob to select the test pattern, from:

7. Press the 

<MENU>

 knob.

Test Pattern Brightness

To set the brightness of the test pattern:

1. Access the 

Display Control

 menu.

2. Turn the 

<MENU>

 knob until 

Test Pattern 

is selected.

3. Press the 

<MENU>

 knob.

4. Turn the 

<MENU>

 knob until 

Brightness 

is selected.

5. Press the 

<MENU>

 knob.

6. Turn the 

<MENU>

 knob to set the brightness, from 

1–4

.

7. Press the 

<MENU>

 knob.

Icon

Meaning

Icon

Meaning

Pure Color

: black

Gradient

: horizontal black to red

Pure Color

: red

Gradient

: horizontal black to green

Pure Color

: green

Gradient

: horizontal black to blue

Pure Color

: blue

Gradient

: horizontal black to white

Pure Color

: white

Gradient

: vertical black to red

Pure Color

: vertical stripes

Gradient

: vertical black to green

Pure Color

: horizontal stripes

Gradient

: vertical black to blue

Pure Color

: black and white squares

Gradient

: vertical black to white

Grid

: horizontal lines

Grid

: vertical lines

Grid

: forward diagonal lines

Grid

: backward diagonal lines

Grid

: horizontal and vertical lines

Grid

: backwards and forwards diagonal 

lines

Summary of Contents for VIP DRIVE 10-5 Nova


























































Reviews:

No comments