Page 24 of 53
Operation
VIP Drive 10-5 Nova User Manual Rev. 1
Data Flow
This setting addresses the panels in the connected assembly for all ports by selecting a starting point and
a direction of flow, as seen from the front of the assembly.
1. Access the
menu.
2. Turn the
<MENU>
knob until
Data Flow (Front View)
is selected.
3. Press the
<MENU>
knob.
4. Turn the
<MENU>
knob to select from the following options:
5. Press the
<MENU>
knob.
Example Configuration
The following demonstrates how to set the Quick Configuration settings for a video panel configuration with
1 VIP Drive 10-5 Nova and 110 F2SQ video panels (168x168 pixels).
1. Set the
to 10.
2. Set the to
to 11.
3. Set the
to 22. This will allow ports 1 through 5 to output to 2 complete rows
each.
4. Set the
to the icon below, which (as viewed from the front) will start at the top left, go all
the way to the right, down by one, all the way to the left, and down by one before repeating.
5. Connect the panels as in the diagram below:
Icon Meaning
Icon Meaning
Starts at top left, goes all the way right, down
by one, all the way left, down by one, and
repeats.
Starts at bottom left, goes all the way right,
up by one, all the way left, up by one, and
repeats.
Starts at top left, goes all the way down, right
by one, all the way up, right by one, and
repeats.
Starts at bottom left, goes all the way up,
right by one, all the way down, right by one,
and repeats.
Starts at top right, goes all the way left, down
by one, all the way right, down by one, and
repeats.
Starts at bottom right, goes all the way left,
up by one, all the way right, up by one, and
repeats.
Starts at top right, goes all the way down, left
by one, all the way up, left by one, and
repeats.
Starts at bottom right, goes all the way up,
left by one, all the way down, left by one, and
repeats.
As viewed from the back
Port 1
Port 2
Port 3
Port 4
Port 5