19
Adjusting the Equipment Mounting Rails
1.
Use an 8 mm socket wrench to remove the eight (4) screws securing the equipment rail to the
frame in four (4) locations. Keep the (4) paint cutting lock washers on the bottom pairs of screws.
2.
Move the equipment rail forward or backward to the desired location.
3.
Re-install the four (4) rail mounting screws and (4) paint cutting lock washers and tighten in all four
(4) locations.
Markings are provided on the frame to help align the equipment rails so that they are vertical as well
as in the same location as the rails on the opposite side of the frame.
When the equipment rails are located in the first 50 mm (2”) at the front (or rear) of the frame, the
frame will provide an internal air dam that prevents air from re-circulating to the front of the cabinet.
