14
Configuring the cabinet
The GT-Series GlobalFrame Gen 2 Cabinet can easily be configured for a variety of applications. Not
only can the standard cabinet components be adjusted or removed, but a broad range of accessories
can be installed to create a cabinet solution that meets all the needs of your installation requirements.
Removing, Installing and Reversing the Front Door
CAUTION
: To avoid personal injury and reduce the risk of damaging the door or the
cabinet, one person should support the door while another person removes the
hinge and the door from the frame.
1.
Open the front door approximately 60 degrees.
2.
Disconnect the ground wire.
3.
While supporting the door, remove the screws that attach the door to the hinge.
4.
Pull the door away from the frame.
Installing the Front Door:
1.
Hold door in partially open position and align hinges on door with hinges on frame.
2.
Attach the door to the hinge with screws. Swing the door to check alignment.
3.
Reconnect the ground wire.
4.
Close front door.
3
