- 5 -
View Peak Result
The Chatillon DFX II Series will display the peak
(maximum) load achieved for a test. There are
two methods to view peak results:
1. Place gauge in Normal mode. Apply a push
or pull force against the load sensor. Select the
PEAK key. View the peak result.
2. Place gauge in Peak mode by selecting the
PEAK key before performing the test. Apply a
push or pull force against the load sensor. View
the peak result.
T
LBF
1.23
Norm
q
q
C
Peak
T
LBF
4.56
T-PK
q
q
C
Peak
Peak
Selecting Mode
The DFX II Series has three measurement modes:
Normal, Tension Peak (T-PK) and Compression
Peak (C-PK). Select the Peak key to display the
peak load measured in tension or compression.
Use the zero key to clear the peak reading and to
prepare the gauge for the succeeding measure-
ment.
T
LBF
1.23
Norm
C
Change Mode
T
LBF
1.23
T-PK
C
Change Mode
T
LBF
1.23
C-PK
C
Change Mode
Peak
Peak
Zero and Taring
The DFX II Series has a dedicated Zero key for
zeroing results or taring. You may tare out up to
10% of the DFX II gauge’s rated capacity. Select
the Zero key to zero or tare.
T
LBF
0.0
C-PK
C
T
LBF
7.89
C-PK
C
Peak
q
q
Note
The corresponding load direction indicator appears
when viewing a peak load result or when load is
being applied to the internal load sensor.
Ø
www.
GlobalTestSupply
.com
Find Quality Products Online at:
