- 9 -
Selecting Units
The DFX II Series has a dedicated Units key. Select
to display results in different units of measure.
DFX II-010, DFX II-050 and DFX II-100 models may
display units as ozf, gf, lbf, kgf or N.
The DFX II -200 will display lbf, kgf or N only.
The Units key may be disabled so that the Units
cannot be changed by the operator. See Units Lock
Feature.
T
OZF
1.23
Norm
C
Change Units
Units
T
GF
1.23
Norm
C
Change Units
Units
T
LBF
1.23
Norm
C
Change Units
Units
T
KGF
1.23
Norm
C
Change Units
Units
T
N
1.23
Norm
C
Change Units
T
C
Auto Shutdown
Peak
T
C
Auto Shutdown
Peak
Auto Shutdown Status
PEAK to Change
INFO to Proceed
OFF
Auto Shutdown Status
PEAK to Change
INFO to Proceed
ON
Auto Shutdown Feature
The DFX II Series has an option to automatically
shut off power when the gauge is not being used
during a 30 minute period, e.g. no key presses.
To enable the Auto Shutdown feature, follow this
setup procedure and depress the following keys:
1. INFO <Capacity>
2. INFO <Firmware>
3. INFO <Overload>
4. INFO <Battery>
5. INFO <Auto Shutdown>
When the Auto Shutdown is ON, the gauge power
will automatically be turned OFF after 30 minutes
of inactivity, e.g. no key presses. This helps save
battery life.
T
OZF
1.23
Norm
C
Automatic Shutdown Indicator when On.
Note
The DFX II will shutdown, when the battery voltage
is at approximately 4.5Vdc.
Replace batteries or use charger accessory.
www.
GlobalTestSupply
.com
Find Quality Products Online at:
