Chassis Plans CCXR-17 Technical Reference
Chapter 1 - Introduction
Page 8
Genesis Based LCD Controller
The LCD Controller is a key component in any display system and no expense has been spared in specifying
the Genesis controller used in the CCXR-17. This is a long life revision controlled military grade component.
The Genesis chip set is the current gold standard for LCD controllers. The controllers support 3x8-bit 16.7
million colors at up to 1600x1200 scaled to 1280x1024 native panel resolution. Refresh rates of 60Hz for UXGA
and SXGA with higher refresh rates for lower resolutions available. Computer input signals of VGA, SVGA,
XGA, SXGA, WXGA and UXGA are supported. DVI inputs supports up to1600x1200 60Hz signals. This
ruggedized military grade controller is rated for operating at -40 to +80 deg C, use low mass tantalum capacitors
for maximum vibration and shock tolerance and are conformal coated for extreme ruggedness. MTBF for the
controllers is in excess of 200K hours.
The controller will provide input scaling of virtually any input signal to scale the image to the 1280x1024 native
LCD panel resolution. They provide for PC, Apple and Sun input resolutions.
Friction Slides
Rugged General Devices friction slides have been specified. Ball bearing slides are a weak point in any
rackmount keyboard design and the use of friction slides negates those problems. Using friction slides allows
the keyboard to stay at the position you place it without the use of troublesome lock-outs. Friction slides also
have a very high tolerance for dust and dirt that typically destroys ball bearing slides in very short order.
Ultra high quality milled aluminum Jonathon slides are optionally available as specified.
