5.3.1 MEDIA
PLAYER
This parameter identifies the kind of media from which Megabeat One reads
songs (during PLAY phase).
The values are:
◆
H.DISK (songs will be read from the inside hard disk);
◆
CD ROM (songs will be read from the outside CD ROM reader).
In order to change the MEDIA PLAYER parameter:
1.
enable the GLOBAL SETTINGS function (as above described);
2.
position the cursor on the MEDIA PLAYER parameter;
3.
press the CHANGE soft key (every time you press this soft key, the
parameter value will change: “H. DISK” - “CD ROM”);
4.
save the changes with the SAVE soft key, or leave without saving, with the
EXIT soft key.
5.3.2 PEDAL
POLARITY
Megabeat One can be connected to a pedal of one of these kinds:
◆
normally open,
◆
normally closed.
With the pedal you can use the START/STOP commands.
If you use a normally open pedal, the PEDAL POLARITY parameter must be
set = . Vice versa, by using a normally closed pedal, the PEDAL POLARITY
parameter must be set = TRIGGER-.
In order to change the PEDAL POLARITY parameter:
1.
enable the GLOBAL SETUP function (as above described);
2.
position the cursor on the PEDAL POLARITY parameter;
3.
press the CHANGE soft key (every time you press this soft key, the
parameter value will change: “” - “TRIGGER-”);
4.save the changes with the SAVE soft key, or leave without saving, with the EXIT
soft key.
45
M
EGABEAT
O
NE
U
SER
M
ANUAL
