N
OTE
1.
Before connecting DIGITAR to Megabeat One by means of the interface TO
DIGITAR, please check the position of the “MIDI INPUT” parameter in the “MIDI
SETUP” Menu, which can be read by pushing the UTILITY button; then set the
parameter on “Auto” or on “Digitar”.
2.
If you connect the Digitar to Megabeat One by means of the “TO DIGITAR”
socket, as described above, the AC adapter /MIDI interface pack which comes with
the Digitar will not be used.
2.5
PEDAL CONNECTION
If you have a normally closed or a normally open pedal (like those used as
sustain pedal for electronic keyboards), connect it to the pedal jack (17) on the
back panel of Megabeat One.
After having adjusted the PEDAL POLARITY parameter (as it is described in
chapter 5: UTILITY/Global settings), the pedal can be used to START/STOP the
songs (it has the same function as the PLAY/STOP button on the front panel).
N
OTE
When a song is being performed, if you push the pedal the song will stop
(as if you pushed the STOP button).
When a song in not being performed, if you push the pedal the song will
start (as if you pushed the PLAY button).
13
M
EGABEAT
O
NE
U
SER
M
ANUAL
