2.3
MIDI CONNECTIONS
The MIDI connections between Megabeat One and any other external sound
generator are very simple and are possible through only one MIDI cable (not
included in the set).
You have to connect the MIDI OUT (19) of Megabeat One to the MIDI IN of
the external sound generator.
If Megabeat On has an inbuilt audio card and you want to drive it by means
of a master keyboard (a sequencer, or a computer), using thus Megabeat One as a
sound generator driven via MIDI, a MIDI cable (not included in the set) is needed
to connect the MIDI IN (18) of the Megabeat One and the MIDI OUT of your
master keyboard.
N
OTE
To drive the internal sound generator of the Megabeat One by means of the
MIDI IN connection, please check the position of the “MIDI INPUT” parameter in
the “MIDI SETUP” Menu, which can be read by pushing the UTILITY button; then
set the parameter on “Auto” or on “External”.
2.4
DIGITAR CONNECTION
Megabeat One has an inbuilt interface for the connection to DIGITAR.
The “TO DIGITAR” socket (14) is at the bottom of the front panel of
Megabeat One on the right side.
The connection is carried out through a 4-conductor phone cable (included in
the DIGITAR). Thus by playing the DIGITAR’s strings you will be able to drive the
inside sound generator of Megabeat One, or send the notes played by DIGITAR via
Midi to any other set connected to the MIDI OUT of Megabeat One.
Should you need further information about the use of DIGITAR, please refer
to Digitar owner’s manual.
12
2. Connections and Commands
