To change the volume of a MIDI channel:
■
position the cursor on the desired channel;
■
turn the PAGE/VALUE Dial to change the displayed value;
■
push the SAVE soft key (if you want to store the variation).
The CHANNEL VOLUME ADJUST parameter will show the variation of the
value stored in the song which has just been carried out (for example: +010, -030.
-095, etc.).
Near each channel, the display will show the total volume value (on that
channel and at that point of the song) which is equal to:
value stored in the song +
variation carried out by the user
N
OTE
Positioning the cursor on the volume labels of the various MIDI channels, the
CHANNEL VOLUME ADJUST parameter shows the variation carried out by the user
for that particular channel. If the user has not carried out any variations (or he has
enabled the RESTOR function) the CHANNEL VOLUME ADJUST parameter is always:
“+000” for all MIDI channels.
GLOBAL PARAMETERS
This section concerns the following parameters:
- REV (reverberation)
- CHOR (chorus)
- TRAN (transposition)
- TEMPO (metronomic time)
REV AND CHOR
◆
position the cursor on the graphic symbol of the desired parameter;
◆
turn the PAGE/VALUE Dial to change the displayed value;
◆
push the SAVE soft key (if you want to memorize the variation).
27
M
EGABEAT
O
NE
U
SER
M
ANUAL
