CHARGETRONIX HPC-160-480-1, Installation Manual, Page: 15 / 21

15
CHARGER SETTINGS
Setting Parameters
During the initial installation, the setting parameters must be set by
the manufacturer, operating partner, or service partner. Changes
may only be made by trained personnel.
To access settings window:
1) Touch the ChargeTronix Logo
2) Provide the password. Password will be shared with the
authorized representative.
3)
Select ‘system settings’
PARAMETER
VALUE
TIME ZONE
UTC+HH:MM
PSM QUANTITY
1
POWER OUT MODE
1
OCCUPLIED PLUG
1
PSM MAX VOLTAGE
1000
PSM MAX CURRENT
300
PSM MID VOLTAGE
200
PSM MID CURRENT
80
PSM MIN VOLTAGE
150
PSM MIN CURRENT
1
PMAX
20000
CCS NETWORK 1
ETH1
INSYS PLC MAC 1
00:00:00:00
TIME
2020-08-20
T20:46:25
.
S.NO PARAMETERS VALUE REMARKS
1 NETWORK ETH Ethernet - DO NOT CHANGE
2 NETCFGFILE /etc/network/interfaces Path - DO NOT CHANGE
3 WLAN CONF /home/guest/wpa_supplicant.conf Path - DO NOT CHANGE
4 DEVICE IP 192.168.2.5 IP Address of Device
5 DEVICE GATEWAY 192.168.2.1 IP Address of Gateway
6 DEVICE NET MASK 255.255.255.0 IP Address of Mask
7 SERVICE URL ws://localhost:8080/ocpp/ OCPP Server URL
8 DEVICE ID 1020180520001001 Device ID (alphanumeric)
9 CHARGE POINT VENDOR ChargeTronix Charger OEM - DO NOT CHANGE
10 CHARGE POINT MODEL DC Charger Type - DO NOT CHANGE
11 ADPATH ./pic Path - DO NOT CHANGE
12 QRCODE NAME NA
13 LANG en Path - DO NOT CHANGE
14 MODE offline/record/upload/debug Path - DO NOT CHANGE
15 CHARGING PIC /img/charging_tata.jpg Path - DO NOT CHANGE
16 IDLE PIC /img/standby.jpg Path - DO NOT CHANGE
17 LCM 1cm=/dev/tty54 Path - DO NOT CHANGE
18 LCM ENCODE TYPE UNICODE Encode - DO NOT CHANGE
19 LCM PASSWORD 123456 Password for Access
20 RFID RFID0=/dev/ttyS1 Path - DO NOT CHANGE
21 PLUG1 GBTDC1:2=/dev/ttyS0 Path - DO NOT CHANGE
22 PLUG2 GBTDC2:2=/dev/ttyS0 Path - DO NOT CHANGE
23 DC1QRCODE NAME NA
24 RFID ORIGINAL NUMBER 0 NA