Chapter 3. Setting Up and Connecting
Assemble the QuickQ Console
• Connect the Tablet Holder to the back of the console using the two captive screws.
• Install the aerial on to the connector labelled
antenna
and extend it vertically.
• Connect the Desk Lamp to the lower USB on the rear of the console.
• Connect the DMX outputs to the fixtures that are to be controlled.
• Connect a Network Cable to the Network port if using.
• Connect an HDMI Monitor if you decide to use one.
• Connect the power supply into the
12V DC
input on the back, then connect it into a mains
AC power.
Connecting the Remote App to a QuickQ Console
QuickQ Consoles are shipped with the WiFi interface disabled. You must
enable the interface the first time before attempting to connect.
1.
Turn on WiFi:
Press the
icon on the top bar and turn the
[
Status
]
switch on.
2.
Download the App:
The QuickQ Remote App is available for free download from the
Google Play and Apple App Stores.
3.
Scan the QR Code:
Use the Remote App to scan the QR Code displayed on the Console
touchscreen.
Assemble the QuickQ Rack
• Connect the Rack Ears to the front of the unit with the small screws supplied.
• Install the aerial on to the connector labelled
antenna
and extend it vertically.
to the fixtures.
• Connect a Network Cable to the Network port, if using.
• If not using QuickQ App for programming, connect an HDMI Monitor and USB Mouse.
• Connect the PowerCON TRUE1 connector on the rear of the QuickQ Rack, then connect it
into a mains AC power
Connecting the Remote App to a QuickQ Rack
QuickQ racks are shipped with the WiFi interface disabled. You must enable
the interface the first time before attempting to connect.
1.
Enable the WiFi
Press and hold the
WiFi
button on the rear of the unit for 2 seconds. The
10
QuickQ v6
2021-03-12
