manualshive.com logo in svg

ChamSys QuickQ, Manual

Share
Download
ChamSys QuickQ Manual Download Page 11

USB memory stick and loaded on the QuickQ consoles. The Designer application does not
output DMX and can not be used to control lights or test remote control.

QuickQ Remote App

The free QuickQ Remote App controls QuickQ consoles and QuickQ Rack from a smartphone
or tablet via the QuickQ’s built-in WiFi. All console windows are available on the app and can
be operated independently of those on the console. The app and a 9.7 inch or larger tablet are
ideal remote interfaces and a second touchscreen monitor set up for the consoles.

SnakeSys 10Scene Wall Plates

SnakeSys 10Scene Wall Plates have 10 backlit buttons to extend 10Scene control. They are
supplied in pairs with both Black & White faceplates with blank labels. These plates fit in a
standard in-wall single gang wall box. Easy to daisy chain, with up to ten 10Scene Wall Plates
per chain, these can cover long distances using solid core Cat5e or Cat6 cable. 10Scene uses its
own 10Scene protocol for communication between wall mounts and the controller. 10Scene
wall plates are powered over the 10Scene protocol, no external power supply is required.

• U.S. fit version (300-054) fit into a standard U.S. Single Gang Box.

• The EU fit version (300-055) fit a EU Single Gang electrical back box.

Further documentation for SnakeSys 10Scene products can be found on

https://secure.chamsys.co.uk/

.

SnakeSys 10Scene Gateway Box

The SnakeSys 10Scene Gateway provides an interface to connect QuickQ consoles to 10Scene
wall plates via an Ethernet connection. 10Scene wall plates are connected to each of 2
Phoenix Connectors on the Gateway for a total of 20 wall stations. Each connector on the
Gateway also provides one connection for one each additional switch input. The switch input
enables simple zoning for airwall systems for multiroom venues. The Gateway has 2 total
zone switches.

Other External Control

The QuickQ Rack and Consoles can receive control from other external control systems.
Further details are provided in the following sections of this manual:

•

MIDI Notes

• MIDI Timecode

•

Open Sound Control

•

Ethernet remote control protocol

2021-03-12

QuickQ v6

7

Summary of Contents for QuickQ











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands