Champion D-H1M5, Installation/Operation Manual With Service Replacement Parts, Page: 24 / 77

14
Dishwasher access doors are equipped with a door safety switch that automatically
stops the dishwasher pump if a door is raised while the dishwasher is running. In
addition, the dishwasher will not start if a door is left open.
1. If the dishwasher is running and a door is raised, then lighted in-cycle light
goes out and the pump stops.
2. Check the interior of the dishwasher for a dish rack still in the machine.
This dish rack must be washed again to ensure it is washed and sanitized
completely.
3. To restart the dishwasher, make sure all doors are closed.
Refer to the photo below and note the location of the pump intake screen and dual float
switch.
1. Make sure the pump intake screen is installed by sliding it on the bracket located above
the wash pump intake.
2. Make sure the float ball on the float switch moves freely on the float stem.
3. Check the interior of the tank for any foreign objects and make sure the drain screen is
clean.
Pump Intake Screen and Float Switch
Installation
Door Safety Switch
Make sure tank is clean, the pump intake screen is installed and the float switch
moves freely.