)NSTALLATION
#ONNECT THE $OOR !RM TO THE 4ROLLEY
)-0/24!.4
4HE GROOVE ON THE STRAIGHT DOOR ARM -534 FACE AWAY FROM THE CURVED DOOR ARM
#LOSE THE DOOR $ISCONNECT THE TROLLEY BY PULLING THE EMERGENCY RELEASE HANDLE 3LIDE THE
OUTER TROLLEY BACK AWAY FROM THE DOOR ABOUT Ñ CM
!TTACH THE STRAIGHT DOOR ARM TO THE OUTER TROLLEY USING THE CLEVIS PIN !TTACH WITH THE RING
FASTENER
!TTACH THE CURVED DOOR ARM TO THE DOOR BRACKET USING THE CLEVIS PIN !TTACH WITH THE RING
FASTENER
!LIGN THE STRAIGHT DOOR ARM WITH THE CURVED DOOR ARM 3ELECT TWO ALIGNED HOLES AS FAR APART
AS POSSIBLE AND ATTACH USING THE BOLTS NUTS AND LOCK WASHERS
./4%
)F THE HOLES DO NOT LINE UP REVERSE THE STRAIGHT DOOR ARM 3ELECT TWO ALIGNED HOLES AS
FAR APART AS POSSIBLE AND ATTACH USING THE BOLTS NUTS AND LOCK WASHERS
0ULL THE EMERGENCY RELEASE HANDLE TOWARD THE GARAGE DOOR OPENER UNTIL THE TROLLEY RELEASE
ARM IS HORIZONTAL 4HE TROLLEY WILL REENGAGE AUTOMATICALLY WHEN THE GARAGE DOOR OPENER IS
ACTIVATED
Straight
Door Arm
Curved
Door
Arm
(Groove
facing
out)
CORRECT
Straight
Door
Arm
Curved
Door
Arm
INCORRECT
Clevis Pin 5/16" x 1-1/4"
Ring Fastener
Clevis Pin
5/16" x 1"
Nut 5/16"-18
Lock
Washer
5/16"
Hex Bolt
5/16"-18 x 7/8"
HARDWARE
Hex Bolt 5/16"-18 x 7/8"
Nut 5/16"-18
Lock Washer 5/16"
Clevis Pin 5/16" x 1"
Clevis Pin 5/16" x 1-1/4"
Ring Fastener
