)NSTALLATION
)NSTALL THE (EADER "RACKET
9OU CAN ATTACH THE HEADER BRACKET EITHER TO THE WALL ABOVE THE GARAGE DOOR OR TO THE CEILING &OLLOW
THE INSTRUCTIONS WHICH WILL WORK BEST FOR YOUR PARTICULAR REQUIREMENTS
$O NOT INSTALL THE HEADER
BRACKET OVER DRYWALL )F INSTALLING INTO MASONRY USE CONCRETE ANCHORS NOT PROVIDED
HARDWARE
Lag Screw 5/16"-9x1-5/8"
/04)/. ! 7!,, ).34!,,!4)/.
#ENTER THE BRACKET ON THE VERTICAL CENTERLINE WITH THE BOTTOM EDGE OF THE BRACKET ON THE
HORIZONTAL LINE AS SHOWN WITH THE ARROW POINTING TOWARD THE CEILING
-ARK THE VERTICAL SET OF BRACKET HOLES DO NOT USE THE HOLES DESIGNATED FOR CEILING MOUNT
$RILL Ñ PILOT HOLES AND FASTEN THE BRACKET SECURELY TO A STRUCTURAL SUPPORT WITH LAG SCREWS
Wall Mount
Optional
Mounting
Holes
Vertical
Centerline of
Garage Door
(Header Wall)
Header
Bracket
2x4 Structural
Support
Door Spring
(Garage Door)
Highest Point of
Garage Door
Travel
Horizontal
Line
Lag Screw
5/16"-9 x 1-5/8"
/04)/. " #%),).' ).34!,,!4)/.
%XTEND THE VERTICAL CENTERLINE ONTO THE CEILING AS SHOWN
#ENTER THE BRACKET ON THE VERTICAL MARK NO MORE THAN Ñ CM FROM THE WALL -AKE SURE THE
ARROW IS POINTING TOWARD THE WALL 4HE BRACKET CAN BE MOUNTED FLUSH AGAINST THE CEILING WHEN
CLEARANCE IS MINIMAL
-ARK THE SIDE HOLES $RILL Ñ PILOT HOLES AND FASTEN BRACKET SECURELY TO A STRUCTURAL SUPPORT
WITH THE HARDWARE PROVIDED
(Header Wall)
Ceiling Mounting Holes
(Finished Ceiling)
Vertical
Centerline of
Garage Door
Header
Bracket
6" (15 cm)
Maximum
Door Spring
(Garage Door)
Lag Screw
5/16"-9 x 1-5/8"
