CGEO-PR-VW Vibrating Wire Portable Readout
CGEO INTERNATIONAL LIMITED
Installation Manual
Next a self-check will automatically begin. This check will include; storage capabilities,
battery voltage and real time clock. When the battery is not enough and no mains
power, the following screen will be displayed and the readout box will turn off
automatically within 15 minutes. It should then be recharged.
The readout box will turn off automatically given one of the following conditions:
a) If there is no key operation after 15 minutes.
b) If the battery voltage is low.
In normal conditions, the self-check will be completed within one second. Within this
time the CGEO VW Readout will automatically identify if there is any transducers
connected. If no transducer is connected screen will remain the same until changed
by the operator. If a sensor is connected then it will default to the reading screen.
Summary of Contents for CGEO-PR-VW
Page 22: ......
