CGEO-PR-VW Vibrating Wire Portable Readout
CGEO INTERNATIONAL LIMITED
Installation Manual
1. The CGEO VW Readout Box uses membrane keys.
2. 128×64 lattice LCD, which can show four rows of characters.
3. “TRANSDUCER” is for connection of the transducers.
4. “CHARGER” is for charging the battery or power supply.
5. “RS-232/485” is for the connection to laptop or PC.
6. “ON” “OFF “to turn power on and off.
7. “SET” for setting parameters.
8. “AUTO” is for automatic measuring and storing data.
9. “MODE” to set the frequency sweep range of different sensors.
10. “MEAS” is for normal reading conditions and when data storage is required.
11. “
”: press once to turn the LCD on and again to turn it off.
12. “
▲ ▼”
are for addressing the stored data and also used when setting the mode or the menu.
13. “
” is the “enter “key confirm data storage in normal condition, as well as confirm choices in
“set” mode.
Summary of Contents for CGEO-PR-VW
Page 22: ......
