CGEO-PR-VW Vibrating Wire Portable Readout
CGEO INTERNATIONAL LIMITED
Installation Manual
Press “
▲”
or
“▼”
to change the data; And if there is no need to change, simply press
“
” to move the cursor to the next one. The rule of changing data is:
a) “Box No.” is from “01” to “15”;
b) “Channel No.” is from “01” to “64”;
In this screen, if yo
u press “SET”, the data will not be stored and the system exits to
the main menu.
Note: After setting the box number and the channel number, only by pressing “
”
can you store these settings.
4.02.2
Storage Page
When you select the Storage Page, the following screen will show:
By pressing “
▲”
or
“
▼”
the cursor move
. Then press “
”to store the information
in SRAM. Then the system will return to the main menu.
4.02.3
Data Clean-up
When you select the Data Clean-up Page, the following screen will
show:
Summary of Contents for CGEO-PR-VW
Page 22: ......
